当前位置:首页计算机类软件水平考试中级软件评测师->Thereisnothinginthisworldconst

There is nothing in this world constant but inconstancy.—SWIFT

Project after project designs a set of algorithms and then plunges into construction of customer-deliverable software on a schedule that demands delivery of the first thing built.In most projects,the first system built is(请作答此空)usable.It may be too slow,too big,awkward to use,or all three.There is no( )but to start again,smarting but smarter,and build a redesigned version in which these problems are solved.The discard and( )may be done in one lump,or it may be done piece-by-piece.But all large-system experience shows that it will be done.Where a new system concept or new technology is used,one has to build a system to throw away,for even the best planning is not so omniscient(全知的)as to get it right the first time.The management question,therefore,is not whether to build a pilot system and throw it away.You will do that.The only question is whether to plan in advance to build a( ),or to promise to deliver the throwaway to customers.Seen this way,the answer is much clearer.Delivering that throwaway to customers buys time,but it does so only at the( )of agony(极大痛苦)for the user,distraction for the builders while they do the redesign,and a bad reputation for the product that the best redesign will find hard to live down.Hence plan to throw one away;you will,anyhow.

  • A.almost
  • B.often
  • C.usually
  • D.Barely
查看答案 纠错
答案: D
本题解析:

题意想要表达的意思是并不好用,正确答案为D,几乎不。附(参考翻译):世界上没有一成不变的东西.——斯威夫特项目组设计了一套项目算法,在按照约定交付给客户时发现了该软件存在结构性的问题。在大多数项目中,建立的第一套系统几乎是不可用的,它可能运行太慢、数据太大、使用不方便等,或者这三者都有。除了重新开始之外我们别无选择,虽然很痛苦但是我们可以更加睿智地构建一个重新设计的版本,解决掉存在的问题。可以一次全部丢弃和重构,也可以分批进行。但是从过往的经验来看,所有的大型系统都必然经历这样的过程。在使用时系统研究新概念或新技术,就必须建立一个系统并抛弃,因为即使最好的规划也不能保证考虑到方方面面,使第一次便获得让人满意的结果。因此,管理并不是考虑是否需要建立一项试验系统然后又把它扔了,因为这是必须的。问题仅在于是否要计划提前打造产品,或作出承诺,为客户提供这种必然会被替换的产品。如果这样来考虑,答案是很清楚的。为客户提供这类产品需要花费时间,但对用户来说痛苦的代价是巨大的,会使建设者他们重新设计时分心,坏的声誉也会导致最好的重新设计难以落实。所以将舍弃写进你的计划;无论怎样,你都会的。

更新时间:2021-11-22 21:31

你可能感兴趣的试题

单选题

一台主机的IP地址为202.123.25.36,掩码为255.255.254.0。如果该主机需要在该网络进行直接广播,那么它应该使用的目的地址为( )

  • A.202.123.25.0
  • B.202.123.25.255
  • C.202.123.24.0
  • D.202.123.24.255
查看答案
单选题

在计算机系统的日常维护工作中,应当注意硬盘工作时不能__(2)__。另外,需要防范病毒,而__(3)__是不会被病毒感觉的。

  • A.电子邮件
  • B.硬盘
  • C.U盘
  • D.ROM
查看答案
单选题

有 4 个 IP 地址:201.117.15.254、201.117.17.01、201.117.24.5 和 201.117.29.3,如果子网掩码为 255.255.248.0,则这 4 个地址分别属于3个子网;其中属于同一个子网的是()

  • A.201.117.15.254 和 201.117.17.01
  • B.201.117.17.01 和 201.117.24.5
  • C.201.117.15.254 和 201.117.29.3
  • D.201.117.24.5 和 201.117.29.3
查看答案
单选题

在异步通信中,每个字符包含1位起始位、7位数据位、1位奇偶位和1位终止位,每秒钟传送200个字符,采用4相位调制,则码元速率为()。

  • A.50波特
  • B.500波特
  • C.550波特
  • D.1000波特
查看答案
单选题

在 Windows 中,运行( )命令得到下图所示结果。以下关于该结果的叙述中,错误的是( )。

Pinging 59.74.111.8 with 32 bytes of data:

Reply from 59.74.111.8: bytes=32 time=3ms TTL=60

Reply from 59.74.111.8: bytes=32 time=5ms TTL=60

Reply from 59.74.111.8: bytes=32 time=3ms TTL=60

Reply from 59.74.111.8: bytes=32 time=5ms TTL=60

Ping statistics for 59.74.111.8:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 3ms, Maximum = 5ms, Average = 4ms

  • A.该命令使得本地主机向目标主机发送了 4 个数据包
  • B.本地主机成功收到了目标主机返回的 4 个数据包
  • C.本地主机与目标主机连接正常
  • D.该命令用于查看目标主机的 IP 地址
查看答案
单选题

在ISO OSF/RM参考模型中,七层协议中的__(1)__利用通信子网提供的服务实现两个用户进程之间端到端的通信。在这个模型中,如果A用户需要通过网络向B用户传送数据,则首先将数据送入应用层,在该层给它附加控制信息后送入表示层;在表示层对数据进行必要的变换并加头标后送入会话层;在会话层加头标送入传输层;在传输层将数据分解为__(本题)__后送至网络层;在网络层将数据封装成__(3)__后送至数据链路层;在数据链路层将数据加上头标和尾标封装成__(4)__后发送到物理层;在物理层数据以__(5)__形式发送到物理线路。B用户所在的系统接收到数据后,层层剥去控制信息,把原数据传送给B用户。

  • A.数据报
  • B.数据流
  • C.数据段
  • D.报文分组
查看答案
单选题

在OSI/RM中,解释应用数据语义的协议层是()。

  • A.数据链路层
  • B.网络层
  • C.表示层
  • D.应用层
查看答案
单选题

在TCP/IP协议栈中,ARP协议的作用是(),RARP协议的作用是(请作答此空)。

  • A.从MAC地址查找对应的IP地址
  • B.有IP地址查找对应的MAC地址
  • C.把全局IP地址转换为私网中的专用IP地址
  • D.用于动态分配IP地址
查看答案
单选题

在地址 http://www.dailynews.com.cn/channel/welcome.htm 中,www.dailynews.com.cn 表示( ),welcome.htm 表示(请作答此空)。

  • A.协议类型
  • B.主机域名
  • C.网页文件名
  • D.路径
查看答案
单选题

在电子表格软件Excel中,假设A1单元格的值为15,若在A2单元格输入“=AND(15<A1,A1<100)”,则A2单元格显示的值为 ()

  • A.TRUE
  • B.=AND(15<A1,A1<100)
  • C.FALSE
  • D.AND(15<A1,A1<100)
查看答案